Antibody Testing Joe Sweeney Antibody Testing Joe Sweeney

What qualifications and instruments do I need to perform antibody testing?

There are different types of COVID-19 antibody tests, each requiring different qualifications and instruments to run. If your clinic, hospital, or lab is considering performing its own antibody testing, here is a breakdown of the types of tests, qualifications, and instruments required to run them so you can make the right decision.

Read time: 3 minutes

Antibody-Testing-Requirements.jpg

There are different types of COVID-19 antibody tests, each requiring different qualifications and instruments to run. If your clinic, hospital, or lab is considering performing its own antibody testing, here is a breakdown of the types of tests, qualifications, and instruments required to run them so you can make the right decision for your organization.

Levels of Laboratory Certifications

All laboratories that perform diagnostic testing on human samples must be registered and certified under the Clinical Laboratory Improvement Amendments of 1988, a set of federal regulations commonly know as CLIA. Some tests require more care and skill to perform and can only be run by laboratories with highly-trained personnel. Other tests are relatively simple to perform and can be run by less-skilled individuals. Each diagnostic test is given a clearance level by the FDA ranging from Waiver to High Complexity. Here is a breakdown of the different levels of certification as they relate to various COVID-19 tests.

1. Waiver

Waiver is the lowest level of clearance required to perform a test. Most clinics apply for and receive this level of clearance. There are currently 5 tests that have been granted waiver status by the FDA. They require a sample to be collected by a swab and then placed in a specialized instrument for analysis. Turnaround times typically range from 30 minutes to a few hours. Some of these tests have not demonstrated as high of sensitivity or specificity as other diagnostic tests, but are much easier to perform because they do not require complicated laboratory processing.

We expect to see more tests granted waiver status over time, including antibody tests. Currently, there are no antibody tests granted Waiver status by the FDA.

2. Microscopy

This certification primarily applies to laboratories that perform microscopy on patient samples — i.e. looking at a sample under a microscope. This does not apply to COVID-19 testing.

2. Moderate Complexity

Moderate complexity tests require a higher level of skill and training to perform correctly. They must be run under the direction of an MD or PhD with clinical laboratory training and laboratory technicians and other staff must meet certain education and training requirements.

There are about 25 tests that have been granted authorization to be performed by moderate complexity labs. These include about 15 antibody tests and 10 swab tests. Some antibody tests still require specialized analyzers to obtain results, as do the swab tests, but they are generally easier to perform than the “gold standard” diagnostic swab tests, which are classified as high complexity.

3. High Complexity

High complexity tests require the highest level of skill and training to perform correctly. They must be run under the direction of an MD or PhD with extensive clinical laboratory training. Laboratory technicians and other staff must also meet more stringent education and training requirements to perform testing at this level.

high-complexity-lab.jpeg

There are about 80 tests that have been granted authorization for processing by high-complexity labs. These are the vast majority of the “gold standard” swab tests being performed throughout the country. Swab samples are collected by a qualified healthcare provider, placed in a tube with a stabilizing media, and transported on ice to a high-complexity CLIA lab for processing.

There are also nearly 200 antibody tests that are listed on the FDA’s notice to distribute list. These tests do not have EUA authorization and must be run in high complexity labs by default. That list can be found here under the dropdown entitled “Q: What commercial manufacturers are distributing serology test kits under the policy outlined in Section IV.D of the Policy for Coronavirus Disease-2019 Tests?”

Applied Biosystems 7500 Real-Time PCR System used to run some COVID-19 diagnostic tests. Photo credit: Wikimedia Commons

Applied Biosystems 7500 Real-Time PCR System used to run some COVID-19 diagnostic tests. Photo credit: Wikimedia Commons

Processing of the gold standard diagnostic tests takes place in a controlled environment to minimize sample contamination and cross-contamination, involves the use of extraction reagents to purify RNA from the samples, and then processing of the samples by a PCR instrument that utilizes thermo-cycling and fluorescence analysis to amplify and detect the genetic material of the virus. Total processing time is around 3 hours. Though there is one authorized PCR test can be run in about 30 minutes.

Types of Antibody Tests

Not all antibody tests are the same. In fact, tests vary widely in required skill levels required to perform and detection methods used. Some tests can be performed in moderate complexity labs while others must be performed in high complexity labs. Some tests require special instruments to obtain results, and others give a simple visual readout, like a pregnancy test. The advantage of more complicated tests is that they usually give more accurate results. However, that is not always the case. Here is a breakdown of the four main types of antibody tests current authorized by the FDA.

1. Lateral Flow Assay

Healgen-antibody-kit.png

Lateral flow assays are the simplest type of antibody test. They require a drop of blood and a couple drops of buffer to be placed onto a test cassette, followed by a 10-15 minute wait, and then visually reading the results window. The presence or absence of certain test lines determine a positive or negative result. There are currently 4 authorized lateral flow tests. We supply two of them.

2. Chemiluminescence Assay

Chemiluminescence immunoassays are similar to lateral flow assays except they require a special instrument to detect the chemiluminescence. There are currently 9 authorized chemiluminescence tests. Most can be run by moderate complexity labs.

3. Fluorescence Assay

Fluorescence immunoassays are similar to chemiluminescence tests except they detect fluorescence instead of chemiluminescence, which also requires a special instrument. There is currently 1 authorized fluorescence test. Most can be run by moderate complexity labs.

4. Enzyme-Linked Immunosorbent Assay (ELISA)

ELISAs are the most complicated type of antibody test to run. They require high complexity certification, careful preparation of samples, special instruments, and several hours to obtain results. There are currently 5 authorized ELISA tests.

What are the differences in accuracy of the tests?

According to the FDA’s serology test validation program results, on average, ELISA and chemiluminescent assays, which require special analyzers, outperformed lateral flow assays by about 0.5% sensitivity and specificity. However, some of the lateral flow assays performed as well or better than some of the ELISAs and chemiluminescence assays. All of the EUA authorized antibody tests are within about 1% accuracy of each other.

The advantage of the lateral flow assays are that they require no special equipment or training and are likely to eventually obtain Waiver status, which means they can be run at point-of-care by most healthcare personnel. They are also the least expensive.

Conclusion

If you are a moderate complexity lab without special analyzers, a highly accurate lateral flow assay is your best option. If you have an analyzer, or high complexity certification, and would like to improve accuracy, you should consider chemiluminescence or ELISAs. However, check the sensitivity and specificity clinical validation data because there are some exceptional lateral flow assays that outperform more complicated tests.

If you have any questions or would like help setting up antibody testing at your lab, clinic, or other organization, please let us know.

Home | Products | Antibody Testing Guide | Contact

Read More